TMS125 低烟无卤阻燃聚烯烃热收缩标识套管
应用
低烟无卤阻燃聚烯烃热收缩标识套管是专为电线电缆标识而设计，由辐照交联低烟无卤阻燃聚烯烃材质制成，具有优异的电气性能、物理性能、化学性能和打印性能，可以方便地用标识打印直接打印，标识持久。不仅符合ROHS和REACH环保指令，而且符合IEC61249-2-21、欧盟2002/72/EC等环保标准的要求。
特性
收缩比：3:1，2:1
柔软、低烟无卤阻燃
可以方便打印
优异的打印性能，持久标识，符合SAE AS81531的打印标识要求
优异的电绝缘性能、物理性能和化学性能
符合ROHS、REACH环保规范
颜色
标准颜色：白色、黄色
其他颜色可定制
操作温度范围
连续使用温度范围：-55℃～125℃
起始收缩温度：70℃
完全收缩温度：110℃
符合标准
SAE AS 81561,MIL-STD-202
UL224 125℃ 600V
性能指标
性能 | 指标要求 | 测试方法 | 典型值 |
纵向收缩率 | ≤10％ | ASTM D 2671 | ≤5％ |
抗张强度 | 10.4MPa min | ASTM D 638 | ≥12MPa |
断裂伸长率 | 200％ min | ASTM D 638 | ≥300％ |
老化后断裂伸长率 (热老化158℃,168小时) | 100％ min | ASTM D 638 | ≥200％ |
热冲击
| 无裂纹 | ASTM D 2671 | 无裂纹 |
低温柔软性 （-55℃，4小时） | 无裂纹 | ASTM D 2671 | 无裂纹 |
绝缘耐压和击穿 | 2500V,60sec,不击穿 | ASTM D 2671 | 不击穿 |
击穿强度 | 19.7 KV/mm min | ASTM D 2671 | ≥20KV/mm |
体积电阻率 | 1014Ω•cm min | ASTM D 876 | ≥1014Ω•cm |
腐蚀性 | 无腐蚀 | ASTM D 2671 | 无腐蚀 |
阻燃性 | 1分钟内自熄 | ASTM D 2671 | 通过 |
打印性能 | 50次橡皮擦，可辨认 30次来回擦，可辨认 | SAE SA81531 MIL-STD-202 | 通过 |
抗液体 （23℃，24小时） | 打印吸识别 | SAE AS81531 | 通过 |
规格尺寸
规格 | 收缩前（mm） | 完全收缩后(mm) | 适用线缆范围（mm） | |
英制 | 公制 | 内径(min) | 内径(max) | |
3:1 | ||||
3/32 | Ф2.4 | 2.4 | 0.8 | 0.9~2.0 |
1/8 | Ф3.2 | 3.2 | 1.1 | 1.1~2.7 |
3/16 | Ф4.8 | 4.8 | 1.6 | 1.8~4.1 |
1/4 | Ф6.4 | 6.4 | 2.1 | 2.3~8.1 |
3/8 | Ф9.5 | 9.5 | 3.2 | 3.5~8.1 |
1/2 | Ф12.7 | 12.7 | 4.2 | 4.6~10.8 |
3/4 | Ф19.1 | 19.1 | 6.3 | 7.0~16.3 |
1 | Ф25.4 | 25.4 | 8.5 | 9.3~21.6 |
2:1 | ||||
3/32 | Ф2.4 | 2.4 | 1.2 | 1.3~2.3 |
1/8 | Ф3.2 | 3.2 | 1.6 | 1.7~3.1 |
3/16 | Ф4.8 | 4.8 | 2.4 | 2.5~4.7 |
1/4 | Ф6.4 | 6.4 | 3.2 | 3.3~6.3 |
3/8 | Ф9.5 | 9.5 | 4.8 | 4.9~9.0 |
1/2 | Ф12.7 | 12.7 | 6.4 | 6.6~12.0 |
3/4 | Ф19.1 | 19.1 | 9.5 | 10.0~18.5 |
1 | Ф25.4 | 25.4 | 12.7 | 13.0~24.5 |
11/2 | Ф38.1 | 38.1 | 19.1 | 21.0~37.0 |
2 | Ф50.8 | 50.8 | 25.4 | 27.0~48.0 |
其他规格尺寸可定制
TMS125 Halogen Free Heat Shrinkable Polyolefin Identification Sleeve
Application
Special designed to meet the requiremwnts of identification of wire and cables. It is made of halogen-free flame retardant polyolefin with excellent electrical, physical, chemical and printing properties. It can be printed by market printed with permanent identification. TMS125 meets the requirement of ROHS, REACH, IEC61249-2-21 and EU2002/72/EC standards.
Characteristics
Shrink ratio: 3:1, 2:1
Flexible, Halogen-free flame-retardant.
Easy to be print.
Excellent printing property, permanent identification, SAE AS81531 applicable.
Excellent electrical, physical, chemical and printing properties.
ROHS and REACH compliant.
Color
Standard color: White, yellow
Other colors are available upon request.
Operating Temperature Range
Operating temperature: -55℃～125℃
Minimum shrink temperature: 70℃
Minimum fully recovery temperature: 110℃
Approvals
SAE AS 81561,MIL-STD-202
UL224 125℃ 600V
Property
Property | Requirement | Test method | Typical data |
Longitudinal shrinkage | ≤10％ | ASTM D 2671 | ≤5％ |
Tensile strength | 10.4MPa min | ASTM D 638 | ≥12MPa |
Elongation at break | 200％ min | ASTM D 638 | ≥300％ |
Elongation after aging （158℃,168hrs） | 100％ min | ASTM D 638 | ≥200％ |
Heat shock
| No crack | ASTM D 2671 | No crack |
Low-temperature flexibility（-55℃,4hrs） |
No crack |
ASTM D 2671 |
No crack |
Dielectric voltage withstand | 2500V,60sec,no breakdown | ASTM D 2671 | No breakdown |
Dielectric strength | 19.7 KV/mm min | ASTM D 2671 | ≥20KV/mm |
Volume resistivity | 1014Ω•cm min | ASTM D 876 | ≥1014Ω•cm |
Corrosion | No corrosion | ASTM D 2671 | No corrosion |
Flammability | Self-extinguishing within one second | ASTM D 2671 | Pass |
Printing performance | 50rubs, legible 30strokes, legible | SAE SA81531 MIL-STD-202 | Pass |
Fluid resistance（23℃，24hrs） | Printing legible | SAE AS81531 | Pass |
Sizes
Size | As supplied (mm) | After recovered(mm) | Recommended use range （mm） | |
inch | mm | Inside diameter(min) | Inside diameter (max) | |
3:1 | ||||
3/32 | Ф2.4 | 2.4 | 0.8 | 0.9~2.0 |
1/8 | Ф3.2 | 3.2 | 1.1 | 1.1~2.7 |
3/16 | Ф4.8 | 4.8 | 1.6 | 1.8~4.1 |
1/4 | Ф6.4 | 6.4 | 2.1 | 2.3~8.1 |
3/8 | Ф9.5 | 9.5 | 3.2 | 3.5~8.1 |
1/2 | Ф12.7 | 12.7 | 4.2 | 4.6~10.8 |
3/4 | Ф19.1 | 19.1 | 6.3 | 7.0~16.3 |
1 | Ф25.4 | 25.4 | 8.5 | 9.3~21.6 |
2:1 | ||||
3/32 | Ф2.4 | 2.4 | 1.2 | 1.3~2.3 |
1/8 | Ф3.2 | 3.2 | 1.6 | 1.7~3.1 |
3/16 | Ф4.8 | 4.8 | 2.4 | 2.5~4.7 |
1/4 | Ф6.4 | 6.4 | 3.2 | 3.3~6.3 |
3/8 | Ф9.5 | 9.5 | 4.8 | 4.9~9.0 |
1/2 | Ф12.7 | 12.7 | 6.4 | 6.6~12.0 |
3/4 | Ф19.1 | 19.1 | 9.5 | 10.0~18.5 |
1 | Ф25.4 | 25.4 | 12.7 | 13.0~24.5 |
11/2 | Ф38.1 | 38.1 | 19.1 | 21.0~37.0 |
2 | Ф50.8 | 50.8 | 25.4 | 27.0~48.0 |
Other sizes are available upon request.
